一、機箱機柜的生產工藝：

1、 Production process of chassis cabinet:

機箱機柜板材上我們有的要求，機箱機柜這個行業，要求標準的機箱機柜板材應該選取的冷軋鋼板，市場上很多機柜并非冷軋鋼制作，一般都是采用熱板甚鐵板進行代替，這樣生產出來的機柜很容易生銹變形。

We have requirements for the chassis and cabinet panels. In the chassis and cabinet industry, standard chassis and cabinet panels should be made of cold-rolled steel plates. Many cabinets on the market are not made of cold-rolled steel, and are generally replaced with hot plates or even iron plates. This makes the produced cabinets easy to rust and deform.

有關鈑材的厚度，一般業內要求標準的機柜鈑材厚度立柱2毫米、側板及前后門1.2毫米，固定托盤1.2毫米。再一個就是關于冷軋鋼板。冷軋鋼板俗稱冷板。它是經過冷軋生成的鋼板，與熱軋鋼板比較的話，冷軋鋼板厚度，而且表面光滑非常漂亮，同時還具有各種性能，特別是加工性能方面。冷軋鋼板能機柜韌性和承重性能。冷軋鋼板廣泛應用于冰箱、汽車、等家電和一些產業設備等。

Regarding the thickness of sheet metal, the industry generally requires standard cabinet sheet metal thickness of 2mm for columns, 1.2mm for side panels and front and rear doors, and 1.2mm for fixed trays. Another issue is about cold-rolled steel plates. Cold rolled steel plate is commonly known as cold plate. It is a steel plate produced by cold rolling. Compared with hot-rolled steel plate, cold-rolled steel plate has a thick and smooth surface, which is very beautiful. At the same time, it also has various properties, especially in terms of processing performance. Cold rolled steel plate can improve the toughness and load-bearing performance of the cabinet. Cold rolled steel plates are widely used in refrigerators, automobiles, household appliances, and some industrial equipment.

要想保持企業的穩定，在生產過程中會選擇適合的材料進行生產，這樣出來的效果也好，用戶用起來也滿意。在機箱機柜生產上熱軋技術確實不如冷軋技術出來的效果佳。

To maintain the stability of the enterprise, suitable materials will be selected for production during the production process, resulting in better results and satisfactory user experience. Hot rolling technology is indeed not as effective as cold rolling technology in the production of chassis and cabinets.

二、選擇機箱機柜的幾個要點：

2、 Several key points for selecting a chassis cabinet:

1、看鋼板，鋼板要厚，你用手指敲一下，就能感覺到哪些厚哪些薄了。

1. Look at the steel plate, it needs to be thick. You can feel which ones are thicker and which ones are thinner by tapping with your fingers.

2、看功能，先考慮的應是性。

2. When it comes to functionality, the first thing to consider should be sex.

3、看散熱，估計一下你的設備發熱量有多大，一般來說，柜頂都有二到四個風扇，風扇都是多多益善的啦。還有一些用來固定機架的螺絲、螺母等，也要足量。不因日后擴展而帶來配件不足的麻煩。

3. Looking at the heat dissipation, estimate how much heat your device generates. Generally speaking, there are two to four fans on the top of the cabinet, and the more fans there are, the better. There are also some screws, nuts, etc. used to fix the rack, which should be sufficient. Not causing the trouble of insufficient accessories due to future expansion.

4、看配件，因為安裝中包括網絡電纜、電信電纜和電源電纜，需要購買鉤環帶或帶齒的帶子來地把電纜有序的固定在機柜里面。假如機柜帶有電纜治理模塊使電纜可以直接固定在垂直安裝軌內，則再好不外。

4. Looking at the accessories, as the installation includes network cables, telecommunications cables, and power cables, it is necessary to purchase hook and loop or toothed straps to orderly fix the cables inside the cabinet. If the cabinet is equipped with a cable management module that allows cables to be directly fixed in the vertical installation track, it would be great.

5、看玻璃，玻璃要厚一點的，還要留意玻璃的周邊是否有裂縫，假如有裂縫，就意味著有隱患了，還有要留意是否棘手。

5. Look at the glass, it needs to be thicker and pay attention to whether there are cracks around the glass. If there are cracks, it means there are hidden dangers. Also, pay attention to whether it is difficult.

6、看噴漆，一個合格的機柜，所有的鋼材都需要噴漆，而且噴漆要平均，這樣才能良好地防銹、防塵等。

6. Looking at painting, a qualified cabinet requires all steel to be painted evenly in order to effectively prevent rust and dust.

7、看架構布局，一般來說，擋板要多，而且具有散熱孔，一些用來固定線纜的鐵皮要包邊，預防損壞線纜。側壁風扇應安裝在機柜后壁，由于設備后部產生大多數的熱量。

7. Looking at the architecture layout, generally speaking, there should be more baffles with heat dissipation holes, and some iron sheets used to fix cables should be wrapped to prevent damage to the cables. The side wall fan should be installed on the back wall of the cabinet, as most of the heat is generated at the rear of the equipment.

三、現在到處都充斥著機箱機柜的身影，那么機箱機柜到底有什么作用呢？

3、 Nowadays, chassis cabinets are everywhere, so what is the purpose of chassis cabinets?

1、它提供空間給電源、主機板、各種擴展板卡、軟盤驅動器、光盤驅動器、硬盤驅動器等存儲設備，并通過機箱內部的支撐、支架、各種螺絲或卡子夾子等連接件將這些零配件牢固固定在機箱內部，形成一個集約型的整體。

1. It provides space for storage devices such as power supplies, motherboards, various expansion cards, floppy disk drives, optical disk drives, hard disk drives, etc., and securely fixes these components inside the chassis through internal supports, brackets, various screws or clips, forming a compact whole.

2、它堅實的外殼保護著板卡、電源及存儲設備，能防壓、防沖擊、防塵，并且它還能施展防電磁干擾、輻射的功能，起屏蔽電磁輻射的作用。 

2. Its solid shell protects the board, power supply, and storage devices, and can withstand pressure, impact, and dust. It also has the function of preventing electromagnetic interference and radiation, playing a role in shielding electromagnetic radiation.

3、它還提供了很多便于使用的面板開關指示燈等，讓操縱者利便地操作微機或觀察微機的運行情況。我們了解機箱機柜，讓機箱機柜很好的為我們服務。

3. It also provides many user-friendly panel switches, indicator lights, etc., allowing operators to easily operate or observe the operation of the microcomputer. We understand chassis cabinets and make them serve us well.

四、安裝機箱機柜有哪些注意事項：

4、 What are the precautions for installing chassis cabinets:

在進行機箱機柜安裝的過程中，我們需要考慮機箱機柜的門應該在哪兒，我們要保持機箱機柜門與地面的距離，一般的情況，應該控制在25mm左右，機箱機柜的箱門設計采用螺絲設計。這樣，可以其良好的開關效果。

In the process of installing the chassis cabinet, we need to consider where the door of the chassis cabinet should be located. We need to maintain the distance between the chassis cabinet door and the ground, which should generally be controlled at around 25mm. The design of the chassis cabinet door adopts screw design. In this way, it can achieve good switching effect.

對于機箱機柜來說，機箱機柜的框架結構也可以對設備起到加強的效果，而且在進行元器件固定方面，它也能具有的幫助。對于機箱機柜來說，承重鉸鏈可以起到很好的承重作用，而且承重鉸鏈的使用利于內部設備的搬運。

For chassis cabinets, the frame structure of the chassis cabinet can also strengthen the equipment and provide assistance in fixing components. For chassis cabinets, load-bearing hinges can play a good load-bearing role, and the use of load-bearing hinges is conducive to the handling of internal equipment.

五、機箱機柜在折彎過程中應注意哪些事項：

5、 What should be noted during the bending process of the chassis cabinet:

1、折彎件在彎曲變形區截面會產生變化，折彎半徑與板厚之比越小，截面形狀變化越大；

1. The cross-section of bent parts will change in the bending deformation zone, and the smaller the ratio of bending radius to plate thickness, the greater the change in cross-sectional shape;

2、折彎件的彎曲線好垂直于軋紋方向，好將毛坯的光亮面作為彎曲件的外表面，以減少外層拉裂；

2. The bending curve of the bent part should be perpendicular to the rolling direction, and the bright surface of the blank should be used as the outer surface of the bent part to reduce outer layer cracking;

3、折彎成形時會產生回彈現象，折彎半徑與板厚之比越大，回彈就越大。

3. Rebound phenomenon occurs during bending forming, and the larger the ratio of bending radius to plate thickness, the greater the rebound.

而在機箱機柜折彎過程中我們需要注意多的半徑加工，因為過大或者過小都會給機箱機柜造成的困難和障礙，而對于不同的半徑下的機箱機柜產品還需要多的去選擇其相應的參數。

In the bending process of the chassis cabinet, we need to pay attention to the radius processing, because being too large or too small can cause difficulties and obstacles to the chassis cabinet. For chassis cabinet products with different radii, we also need to choose their corresponding parameters.

本文由濟南機箱機柜 整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊：http://www.hua155.com我們會有更多精彩內容等你查看。

This article is compiled and published by Jinan Chassis Cabinet. Do you have any understanding of these contents? For more content, please click: http://www.hua155.com We will have more exciting content waiting for you to view.