電阻測試法 ：

　　Resistance testing method:

　　利用萬用表的電阻檔測量電機、線路、觸頭等是否符合使用標稱值以及是否通斷。

　　Use the resistance range of a multimeter to measure whether the motor, circuit, contacts, etc. meet the nominal values and whether they are open or closed.

　　使用兆歐表測量相與相、相與地之間的絕緣電阻，確保絕緣性能良好。

　　Use a megohmmeter to measure the insulation resistance between phases and ground to ensure good insulation performance.

　　電壓測試法 ：

　　Voltage testing method:

　　利用萬用表測量電路中的電壓值，包括電源電壓、負載電壓及開路電壓，以判斷電路是否正常。

　　Use a multimeter to measure the voltage values in the circuit, including power supply voltage, load voltage, and open circuit voltage, to determine if the circuit is functioning properly.

　　機械檢測 ：

　　Mechanical inspection:

　　通過觸摸電氣設備外殼的振動和溫度，粗略判斷設備的運行工況是否正常。

　　Roughly determine whether the operating conditions of the equipment are normal by touching the vibration and temperature of the electrical equipment casing.

　　檢查機械部件的安裝牢固性、螺絲緊固情況以及外觀，確保機械系統無故障。

　　Check the installation firmness, screw fastening, and appearance of mechanical components to ensure that the mechanical system is fault free.

　　靜態與動態檢測 ：

　　Static and dynamic detection:

　　靜態檢測：在設備不通電的情況下，檢查外部部件如開關、按鈕、插口及指示燈的工作情況。

　　Static detection: Check the working condition of external components such as switches, buttons, sockets, and indicator lights when the device is not powered on.

　　動態檢測：在設備通電后，進行各項功能的調試和檢查，觀察是否有異?，F(xiàn)象。

　　Dynamic detection: After the device is powered on, perform debugging and inspection of various functions, and observe whether there are any abnormal phenomena.

　　先簡單后復雜 ：

　　Simple first, then complex:

　　先處理簡單、直觀、常見的故障，再處理復雜、難度較高的故障，以提高維修效率。

　　First deal with simple, intuitive, and common faults, and then deal with complex and difficult faults to improve maintenance efficiency.

　　先外部后內部 ：

　　First external, then internal:

　　先檢查外部部件，如開關、按鈕等，再拆卸內部設備進行檢修，以減少不必要的拆卸。

　　First inspect external components such as switches, buttons, etc., and then disassemble internal equipment for maintenance to reduce unnecessary disassembly.

　　接地檢查 ：

　　Grounding inspection:

　　檢查主要元器件的接地情況，確保斷路器、真空接觸器、電容器、電抗器等設備的接地良好。

　　Check the grounding status of the main components to ensure good grounding of equipment such as circuit breakers, vacuum contactors, capacitors, and reactors.

　　元器件檢查 ：

　　Component inspection:

　　檢查各元器件的安裝牢固性、螺絲緊固情況以及外觀，確保無損壞或老化現象。

　　Check the installation firmness, screw fastening, and appearance of each component to ensure no damage or aging.

　　短路檢查 ：

　　Short circuit inspection:

　　檢查電路中是否存在短路現象，確保接線正確、無裸露導線。

　　Check for short circuits in the circuit, ensuring correct wiring and no exposed wires.

　　功能測試 ：

　　Functional testing:

　　按照?qǐng)D紙及說明書進行各項操作，行正常啟停機操作，再觀察各項故障保護動作是否正常。

　　Perform various operations according to the drawings and instructions, first perform normal start stop operations, and then observe whether various fault protection actions are normal.

　　本文的精彩內容由濟南電氣成套提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入： http://www.hua155.com 我們有專門的客服為您解答問題

　　The exciting content of this article is provided by Jinan Electric's complete set of knowledge. There are also many exciting contents on this website. For more content, you can click to enter: http://www.hua155.com We have dedicated customer service to answer your questions